YakProject Docs

How to record a daily log in YakProject

The daily log is the job's record of who was on site and what got done. YakProject can fill the manpower section from the crew clock, so the superintendent adds the day's story instead of retyping headcounts.

Before you start

  • Superintendent, foreman or manager on the job

Preview voice Narrated with a local preview voice; the final recording replaces it.

Transcript

Record today's daily log, with manpower filled in from the crew clock.

In Daily logs, today's tile says Due today. Select Start log to open a new log for today.

Select Fill from crew clock. YakProject adds a row for each crew on the clock today, with its headcount and labor hours.

In What happened today, write a sentence or two about the day: the work done, and anything that held the crew up.

Select Save draft. The status bar confirms the log is saved, and you can finish the remaining sections later.

Steps

  1. Start today's log ▶ 0:06

    In Daily logs, on today's tile, select Start log.

    Daily log editor for today with ten sections to record

  2. Fill manpower from the crew clock ▶ 0:13

    In Manpower, select Fill from crew clock.

    Manpower section filled with today's crews, headcount and hours

  3. Describe the day ▶ 0:22

    In What happened today, describe the day's work.

    What happened today box with a short summary of the day

  4. Save the draft ▶ 0:30

    Select Save draft. Daily log draft saved. appears.

    Daily log editor confirming the draft was saved
ResultToday's log is saved as a draft with manpower and a summary, ready to finish and complete.

Next steps

Updated 2026-10-26